I had some spare time recently while waiting for finish to dry and thought I would experiment with some inlay techniques. I have always found a piece of inlay with a surrounding border to be fascinating to be able to make. I need to confess, I've done this before although quite a while ago and need the practice. What I had in mind is a fair sized yellowheart diamond with a black border, I used blackwood. I have the inlay set in a lighter wood, nothing special, just a small offcut. The process of creating and inserting the inlay is a very good test of patience and fine hand tool skills , for almost everything here is accomplished with hand tools. The border itself is bandsawn from a larger piece of blackwood and the yellowheart also bandsawn from a solid block. The yellowheart inlay is first drawn out and cut with careful attention to the shape of the diamond, each of the sides and facets needs to be a mirror image of the other side. I then mark the inlay onto the lighter background wood with an allowance or margin for the surrounding border. Once marked with a fine knife, I then remove or carve out the recess for both the diamond and border. Next step is to fit both the yellowheart inlay and blackwood border into the recess with glue , make sure it is well seated and wait for everything to set. Afterwards, I judiciously handplane the inlay and the result is in the photo at top. I find it great therapy to go off and do some other type of woodworking during or after some intensive furniture making, it clears the mind and the instant results can be very gratifying, the practice also keeps the skill retention up...
