Tuesday, February 5, 2008

Board preparation...

I left off in my last post with a few boards in the process of acclimatizing to my work area and to relieve any built up stress in the wood. A few days have elapsed and as expected, there is a little tendency of cupping and bowing in some of the individual boards. This is minimal, but nonetheless needs to be addressed. One face of each of the boards needs to be perfectly flat in both width and length. I continued to process each of the boards today to make certain this one face also known as the reference face of the boards, is true and flat. The thickness of the individual boards is slightly greater than I need for a final thickness and this will allow me to plane the opposite face to the exact final thickness I need.

In the photo I have a few of the boards after some more preparation along with some of the tools I use to measure any cup or bow in each board. At the left, there is also a solid steel straight edge which I use to check bow along the length of the board. The combination square at right serves to any cupping of the boards along their width. The small steel engineers square is used to measure the long edge of the board to confirm it is square to the reference face.

These past few days have also allowed me to temporarily switch my focus to another endeavor. My wife has slowly been ramping her small business up, and over a week ago we decided to take some concrete steps to get it established. The business is now set up, and I have also set up her web site. This past Saturday, Linda had her very first showing at the grand opening of a small tea house and shop in our area. This is a very heady and exciting period for her, it sort of reminds me of myself when I began my original business a few years ago. I'll post her web site if anyone is interested in having a look: http://www.fusionjewelrydesign.com/

Wednesday, January 30, 2008

Wood selection and dimensioning...

I last left off having finalized the design and at the beginning of the wood preparation stage. In the past few days I've created a cut list of components I will need for the carcase of the cabinet. The cabinet case is solid wood, European QS Beech, and I have in my inventory some nice 8/4 planks of this species of wood. I happen to like working with QS Beech. It's extremely fine-grained wood and has a nice ray pattern to it, of course depending on the board. The planks of wood I have in my inventory are primarily quarter-sawn with some rift-sawn cuts mixed in. Each length of the 8/4 beech provides me 2 boards and the leftover , approximately 5/8 in., is to be later selected for use in veneering the door panels.

I judiciously measured and re-measured the correct lengths for the cabinet top, cabinet bottom, and sides before dimensioning the large planks. The planks are actually greater than 8/4 in thickness, more so approaching 2.5 inches. Once the lengths are cut to size , my next step is to create a rectangular slab from the large thick piece. These planks came with the optional wane or bark present on the plank... Ok, just kidding here. These planks are so large you can imagine how large the girth of the tree was. The radius of the bark on one edge of the planks allow us to estimate how large the diameter of the tree is and provide us a glimpse into the age of the tree.

Following the cross-cutting of the planks into slabs, the next step was to resaw the slabs into appropriate sized boards. I allow a decent percentage of the thickness of the resawn board to accommodate the acclimatization and the release of tension that inevitably results from resawing thick slabs of wood. The idea here is to resaw fairly thick boards, wait to have them acclimate to the studio and to release any built-up tension, and then continue processing the boards. This is done in stages and the end result is a stable, flat board at precisely the dimensions and thickness I am looking for.

In the photo from left to right are irregular pieces with wane or bark, an end cut of the original slab, and the resawn boards which comprise the case for the cabinet on stand. There are also thinner leftover boards from the resawing operation that I will further resaw to create veneers for the veneered door panels. The resawn boards are nominally thicker than final dimensions and currently acclimating to my studio.

I'm also succumbing to cabin fever, as it is easy to lose track of time when we're focused. I need to go out and get some skiing in. In my area (Ottawa, Ont.) happens to be located the world's longest skating rink, a few miles long to be exact. It has recently opened, or a large part of it. This is another favorite winter pastime of mine, to get out and do some serious skating.

Saturday, January 26, 2008

Cabinet design (3)...

The evolution of the cabinet on stand continues, or should I say the devolution. In consultation with the client, the radical front with exposed drawers was a bit much. After even scaling back to a single drawer it was decided to not have any exposed drawers. I will instead embellish the door panels with some decorative treatment, an inlaid design. I will probably make a piece such as I had preciously drawn at some point in the future for purposes of speculation. In the meantime, I have almost finalized the drawing for this current cabinet on stand. As mentioned previously, the stance of this cabinet will have a lower, wider profile and it is to be purely a showcase type cabinet. With this in mind, I will leave the configuration of any interior drawers until later and focus on the case of the cabinet at the moment. I'm kind of excited about this project in that the form of the cabinet I find very aesthetically pleasing and the uniformity of the woods comprising the cabinet itself is a change from my previous commission. I also have artistic freedom to an extent with this commission with respect to detail work, interior layout, and the stand for the cabinet.

The European Quartersawn Beech I intend to use is a very fine wood, tight-grained and very uniform in texture, color , and appearance. This allows me more flexibility with any inlay adornment on the front of the doors later, a little like a having blank canvas to work with. Over the next few days I will begin to rough cut the wood to be used in the cabinet carcase or case. I do this in stages, allowing the wood to both acclimatize to my studio and to provide it enough time to release any internal tensions which have been exposed through cutting and dimensioning of the wood.

Next I will finalize the dimensions and exact measurements of the case and begin to prepare a cut list from which I can determine how best to dimension and prepare the wood I will be using. The case will be solid wood, the doors veneered with the same wood, and the back I intend to have a frame and panel.

Wednesday, January 23, 2008

Creativity runs rampant...

I need to make a confession. The genuinely creative person in my household is my wife. Okay, I'm kidding, we're both artistically inclined it seems. My wife began making bead type jewelry a year or so ago, and has since progressed into mixed media type jewelry, namely wood inlaid with metal. Her preferred wood is cocobolo with silver inlay. Cocobolo is a fantastic wood for this application since it polishes well, is very tight-grained, and has beautiful colored streaks giving it character. Linda began with small square inlay and has since delved into irregular shapes such as diamonds, curved inlay, and multi-sided inlay. I mentioned to her I would post a photo of her work on this blog since her work does originate from here, not quite from my studio, but nonetheless. Linda also trained for a short while with a leading goldsmith in the area and has developed a excellent background on working with metal and forming metal, of course, the education never ends.

Linda's jewelry making has opened up new experiences for us, we often shop for wood together, visiting local dealers in the quest for the ideal pieces of wood. I've spent some time with her on a couple of the pieces, critiquing her work. This went surprisingly well in spite of what we thought would occur. She is appreciating how important a virtue patience is, and how important it is to spend the extra time to get things just right. The designs are all hers, I just rough cut the pieces of wood and she trims them, creates a recess for the inlay and applies the inlay. The shaping, finishing and polishing are her domain, I usually just see the finished pieces. The jewelry stand was created by Linda's father, another fine craftsman.

Linda is currently experimenting with other woods such as blackwood and is also developing some new designs. She keeps challenging herself with more interesting designs, working her creative side and very much enjoying this. Back to the regularly scheduled programming, I continue to refine the cabinet on stand design and should have a final design with mock-up ready soon.

Sunday, January 20, 2008

Cabinet design (2)...

I'm on track with my next commission and am currently in the process of designing it as I mentioned in the last post. The client has given me free reign over the design with only some dimensions to follow, namely the height and width. This will be a cabinet on stand and somewhat different than the previous jewelry armoire. The proportions are based on more of a showcase , with a wider stance and lower height. The client specified a few drawers in the design, but the location of the drawers within the cabinet is not important, sufficient space for art objects, etc... is important however. The color of the cabinet is intended to be of a light color with darker, contrasting detail. The stand for the cabinet will also be in a darker wood. Since I can design as I please, I thought I would give myself a challenge in the process. I have the design of the cabinet front incorporating a large drawer opening with four drawers.

Blending the front door panels with drawer fronts becomes a challenge in that I intend to have a seamless transition from door panel to drawer fronts with minimal reveal between them. The drawer fronts themselves will have a lower lip which hides the drawer divider between each of the drawers. My intention is to have nothing but four drawer pulls, the two door pulls and some detail elements on the front or facade of this cabinet. The location of the door pulls has not been finalized and I am also considering mounting them in the upper center of the doors. This is all secondary to the design at this point.

Unlike the previous jewelry armoire, this cabinet will have full panel doors, most likely veneered doors. I do have available some light colored solid beech which is almost quarter-sawn, bordering on rift-sawn. The expansion coefficient for European beech is 5.5 when quarter-sawn, and this will definitely be a factor in my decision whether to use either solid wood panels or veneered panels. I also need to consider that the two cabinet doors expand and shrink individually, therefore this 5.5% rate increases the movement to 1.3 inches from .6 inches in absolute terms for a 24 inch expanse of panels. At this point I'm focusing on the design however, and in the next few days will have a better idea on how I will proceed. My next step is to formalize some drawings and present them to the client for approval. I'll also mock up the cabinet front for a better idea of the proportions and scale of the unit, once I have an approved design in hand.

The stand itself will either be integral with the cabinet or detached and give the semblance that the cabinet is floating on the stand. Putting a design on paper is an excellent exercise, it allows one to visualize how the components of a piece of furniture blend in together. This is one of the first steps in creating a piece of furniture after some preliminary sketching
.

Friday, January 11, 2008

Cabinet design (1)...

It's been a hectic past week with some unfinished small work to complete in my studio. I usually leave the odd tasks to be completed between furniture projects. This past week was an ideal time as the studio is once again uncluttered. I've sort of disciplined myself into cleaning up and putting my tools back after a day's work, I owe this very good habit to a furniture school I attended, the students attending the school clean the complete bench area at the end of the day. I'm also still in the process of applying finish to the jewelry armoire, I have been given a reprieve as the owner is out of town for another week or so. I will definitely post pictures of the armoire, which is developing a beautiful patina, in it's completed state once ready. In the meantime, the design of my next piece of furniture is slowly moving to the forefront. I am beginning to lean towards a cabinet much in the same vein as the armoire but lower and with different proportions. I don't need to have quite as much height in the cabinet since it is for the most part a showcase.

There are a few fine examples of the design I am considering with inspiration from James Krenov work. Another consideration I am mulling over is to use two one piece front doors which will probably be veneered. If I decide this, the doors will not be the customary frame and panel design, but instead veneer over substrate. A large advantage to this type of construction is that there is more surface area available to the wood (figured?) used in the door, thereby enhancing it as a component of the focal point of the cabinet. I'm also debating whether to introduce curved doors into the design, another advantage of veneer over substrate design.

I also have more flexibility in this design as some of the constraints of the previous armoire are unnecessary. In the above photo, I have an earlier drawing which describes a single panel door as opposed to the previous frame and panel door. This design can be quite elegant if executed properly. I also have in mind to use lighter colors with more subtle contrasting shades and colors in the detail.The above design is what I'll be using as a basis for what I will be presenting to my client. The design will evolve from this drawing as it morphs into a slightly wider and more squat cabinet on stand with a pair of doors instead. The proportions are going to be a bit tricky as they might clash with the Golden Rectangle rule of a pleasing ratio of proportions. I'm going to be placing some blind faith into the fact that James Krenov has already designed cabinets with these proportions and these cabinets are definitely aesthetically pleasing.

The layout of the interior of the cabinet is yet to be decided, and I prefer it this way actually. Another consideration with this new design is the depth of the cabinet, it does not need to be quite as deep as the previous cabinet (armoire). This upcoming cabinet design is leaning towards a showcase cabinet with less focus on functionality. An example of function follows form instead of the typical form follows function?

In my next post, I should have a new drawing with a better indication of where I'm headed with this design.

Friday, January 4, 2008

Thoughts on design...

I had an enjoyable Christmas holiday period along with my wife, and we managed to get some skiing in as well as trekking through small boutiques and shops in the mountain villages up here. The weather has been snowy but great otherwise. I last left off with the jewelry armoire fairly complete aside from some small detail work, the hardware fitting and the actual finishing process. I've been prepping the armoire in the past day or so to begin applying the thinned shellac coats using a small pad applicator. Typically I apply many light coats of shellac with some very light, fine sanding between some of the coats, this is to keep the shellac layers levelled and remove any nibs, etc.. The finishing I will begin in the next day or so.

In the meantime I've been giving some thought to a new design I will be working on next. The client for this piece has also been following the jewelry armoire project and would like a piece in a similar vein with some unique differences. This particular piece will not be dedicated to jewelry, at least this is the design discussed to date, I therefore have fewer restraints to work with. The new cabinet on stand I have in mind for this client is not quite as tall as the jewelry armoire and will have a different drawer arrangement inside. There is no need for as many drawers as the jewelry armoire in this design. At this point I haven't even created any sketches for the client, just some thoughts in my mind and visions of what I would like to propose to the client. I'm debating a few different designs in my mind and am also considering incorporating some curved work into this cabinet on stand. I have many considerations to discuss with the client including the

- contemporary styling of the piece
- surrounding furniture ( complement or contrast)
- focal piece or blend in
- showcase or not
- proportions and scale with respect to room space
- color ( wood types)
- detail work
- flat or curved panels
etc.


I'll be working on these criteria in the next few days while I am completing the jewelry armoire. In the meantime, above is a drawing of a credenza design I had worked on a few months ago. This particular design was a blend of contemporary and Hepplewhite style influence, with the Hepplewhite elements being predominant. Although I have a few designs ready, the actual commission has not occurred to date. When and if it does occur, the beauty of hard copy sketches is that I will have them ready and we can continue with the evolution of this particular design. The design of this credenza also allowed me to delve into Hepplewhite period furniture elements and design, all good for future reference.

Monday, December 24, 2007

Armoire detail (1)...

















Some of the detail in closer range. Note the small black diamonds
in each upper corner of the cabinet. I felt the cabinet needed this
for better balance with respect to colors and patterns.It is also a nice,
subtle decorative touch to convey the diamond theme.These photos
are just before I install
some additional brass hardware in the area
above the drawers
and begin the finishing process. I need to break
now for the
Christmas holidays. I wish you all a great Christmas!

Sunday, December 23, 2007

Armoire stand (3)...

The front door pulls have been created and installed. It's beginning to look like a complete cabinet on stand now. I designed the door pulls to have a half-diamond embedded at the front to carry the diamond theme into the armoire cabinet itself. I feel that there is now just the right balance of color in this armoire,a subdued but striking look. I did not want to take any focus away from the tiger maple door panels but at the same time wanted to have a fine symmetry in the colors of the cabinet.In my opinion, the hint of white holly in the door pulls makes the difference.The armoire is now oriented and secured to the stand at the moment with one pin on either side, where pin refers to a short length of dowel. I can quickly detach the cabinet from the stand to continue with the next phase of work to do on this armoire. I have some specialized hardware to install in the interior of the cabinet, but this can wait until after I have partially applied some finish.

The first phase of the finishing process involves lightly scraping all surfaces, removing any lingering pencil marks , and checking for anything else I would not want to have under the finish. The finish itself is thinned shellac applied in multiple coats with an applicator pad. This is a lengthy process as each coat is thin and only with many coats does the finish begin to attain the right sheen and depth.

I decided a couple of years back to begin using more natural finishes on my furniture pieces. The benefits to this are primarily health motivated and as well the finishes are pleasant to use and with the right consistency can be applied with an applicator pad. My finish of choice is thinned clear or super blonde shellac with a light coat of wax afterwards. I mix my own shellac and set myself up to be able to finish a piece of furniture over a period of a few days. Shellac coats dry rather quickly so the possibility of dust nibs on the surface are next to nil. Many thinned coats almost guarantee a nice, even finish if the strokes of the applicator pad are offset every so often.

It's interesting to notice how much the upper cabinet ( armoire) has already naturally darkened compared to the armoire stand which is only recently put together. This disparity in color will blend together over the next two weeks or so, one of the great features of cherry.

Saturday, December 22, 2007

Armoire stand (2)...

I've gone ahead and did some decorative detail work on the front apron of the stand for the armoire, and also managed to squeeze some Christmas shopping in. Since this is essentially a jewelry armoire, I decided on a diamond theme for the inlay detail. The pattern on the apron creates, at least in my mind, a semblance that the stand is holding the armoire up. The center diamond in holly balances out the theme and provides a contrast to the outside blackwood half-diamonds and stringing. As with anything woodworking related, the inlay work involved precise measurements since the pattern is symmetric. Working on and creating the inlay detail was immensely enjoyable to me although a little stressful at times since the spare apron I had set aside somehow developed a ding. The stand is completely assembled now and has been test-fitted with the armoire attached. I'll use wood pins to connect the armoire and stand together, this will make it simple to separate the two pieces for transport and also for any other reason that might come up.

I'm now working on some decorative door pulls. I'm going to embed some holly into the blackwood pulls to carry the blackwood and white holly colors from the stand to the armoire. There will be a subtle inclusion of holly in the door pulls with once again, a diamond theme. The door pulls have a small tenon with four shoulders which fits into a chiseled recess in each of the doors. I carefully marked the door pull recesses and confirmed that the pulls are perfectly aligned in both planes.

In the photo, there are two blackwood half-diamonds on the outside of the apron , with blackwood and holly curved stringing leading to the center of the apron. Just above the center is located the holly diamond. I selected these two woods to provide good contrast once the cherry ages and develops a darker color and patina. I don't apply any stain to my work and instead let the natural aging process of cherry develop its own distinct color, and use as many woods with natural contrasting colors as possible..

There is more work to do for me on the armoire, mostly completion work however. I need to install a couple of brass carousels and brass pegs, create compartments in the drawers, and also line the drawers. Now I can begin to focus on getting the detail correct and lightly scraping the surfaces on the unit to prepare for finishing. I'm also at the point where I can very soon begin finishing the armoire while I work on the drawer compartments.

Thursday, December 20, 2007

Armoire stand (1)...

I've just about completed the legs and aprons for the (cabinet) armoire stand after allowing some time for the wood to release any internal tensions which might have developed. These internal tensions are brought out in the resawing work I performed for both the leg blanks and aprons. I began with a wide plank of 8/4 cherry for the legs and ripped four leg blanks from this blank. I oriented each leg blank on the plank to attain the best possible grain configuration, in this case a rift-pattern with no face grain on any of the leg faces. This is a little more wasteful of wood, but it's definitely worth the time spent. The legs blanks have a very pleasing straight-grained orientation on all four faces. In the photo, I marked the pattern of the grain on the ends of the legs and it is slightly visible.

Afterwards, I proceeded to mark and create the mortises for the mortise and tenon joints at each leg. Since I initially created the stand, I needed to create the stand with the exact dimensions in length and width to appear integral. This was a greater challenge than I anticipated, since the measurements become very critical and need to be exact. The cabinet and stand need to appear to be one unit. Therefore, the aprons need to be measured with allowance for the legs at either end and for the tenon itself. The tenons have four shoulders to be completely housed within the joint, and are offset on the face of the legs towards the front. There was a bit of trial and error and I actually made a small trial joint with similar dimensions to test for measurements, as the apron faces need to be flush with the leg surfaces.. After some deliberation, I decided the safest approach would be to prepare the mortises first, then cut the aprons a little longer than final length and cut the tenons.I had the final measurement of both the front, back and sides and worked back from this, subtracting the thickness of the already prepared leg blanks.

This worked well and I slowly snuck up on the final measurement for the apron. A shoulder plane is a godsend in this situation, as it is specifically designed to trim and tune tenon shoulders. I kept at this while often checking that the tenon and shoulder is square and perpendicular to the apron. Shortly afterwards, I had four aprons ready. I've since assembled the stand using clamps and actually test fit the armoire on it. I am now creating the tapers on the legs. The design on these tapered legs has the taper beginning a few inches below the apron to the foot of the leg. The two inner faces of the legs are tapered. I rough cut the tapers using a bandsaw and then it is strictly handplane work, in this case a jointer plane. It is quite a satisfying operation to watch the tapers being created without too much effort and without use of fancy jigs, just handplanes for the most part.

I'll continue with preparation of the stand components and probably have it together in a day or so after I create some decorative detail work on the front apron.