Cabinet on Stand

A while ago, I created a small cabinet that had been designed to be table-mounted. Over time, the issue was lack of table space causing me to move the small cabinet here and there. It seemed to always be in the way. Of course, it could have been converted to a small jewelry cabinet, but there was no demand for this. A little thought went in to the next life of the cabinet and the idea of mounting it on a dedicated stand came up. So this is what I did. The cabinet itself is not deep and a stand would need to compensate and add depth to the structure. Unless the depth was increased, there would not be sufficient stability.

After some thought, re-visiting earlier designs of mine, and perusing though James Krenov's designs, it came to me. The cabinet would float over the stand allowing me to increase the depth by approximately 1.5 inches. Along with is, I introduced the technique of bird's feet at the bottom. These elongated, arced wood elements extended the depth or form another 2 inches. All told, the new depth was sufficient to make the cabinet on stand stable.

The build also consisted of some modifications to the actual European beech cabinet. New drawer faces, applied contrasting edging and lowering of the base. Cherry was selected for the stand to contrast with the much lighter beech of the cabinet. The cherry stand was built separately. Legs are rift-sawn cherry and the rails are staggered to lighten up the façade and introduce strength and rigidity. Since there are no lower rails in this stand design, the upper, offset rails would need to be mortised into the legs. I also added a contrasting piece of inlay to the upper front rail of the stand to balance the aesthetic. Images below are after the completion of the build and approximately a week later. Cherry has become darker since, as seen in later images.

New woodworking book...

So after a tumultuous month of March, the latest woodworking book is complete and published. Available in digital and print. March began with a bang (literally). My wife and I were broadsided at an intersection causing our SUV to roll and slide down the road for 100 ft. or more. We got out with aches, pains and bruises but on the mend now. The healing time allowed me to focus on this book more heavily and today I am happy to announce it's release! Below is a description for the book.

Decades of furniture making experience combine with furniture design in this new and refreshing take on woodworking. In addition to detailed furniture making techniques, the book delves into the thought process behind furniture design. Skills and processes to advance you as a woodworker and furniture maker are described. The book is also a window on the life of a furniture maker. Although the focus of the book is hand tools, use of machines in the preparatory phase of a furniture build is addressed. Time and labor-saving precision hand tool procedures are discussed. The emphasis turns to hand tools in latter stages of a furniture build where attention to detail is necessary. A reverence to wood as a medium is featured throughout the book.

Homage is paid to classic techniques such as dovetail joinery and workbench processes. As well as the traditional, modern techniques and processes are put forward to make your furniture designs stand out and be unique. The focus is one of a kind furniture, the unique furniture and wood objects that separate you from other makers. As a furniture designer + maker, discover my passion, what drives me and where I draw inspiration from. Learn how to develop your own style, aesthetic and voice in furniture design. It is not the how but the why behind the process that is often critical in a furniture maker's mind and practice.

The premise for this book is to provide insight into the craft of woodworking and more specifically the creation of furniture. The book is composed of sections, each of which is critical to your woodworking journey. Acquiring skills and knowledge in the last century involved taking classes, reading books or mentoring with a knowledgeable woodworker. Today, in comparison, there is a wealth of knowledge available through the Internet. What is lacking however, is the hands on aspect of the craft of woodworking. Learning involves making. I know of no one that learned a craft by simply reading and not applying themselves. It is critical to embrace the often lengthy learning curve involved. This book includes several articles focusing on aspects of woodworking in a contemporary world.

The book is composed of four sections. Each section contains articles that a woodworker or furniture maker will need to embrace as they evolve. The first section introduces basic woodworking skills. A large part of this book is devoted to hand tool skills. Although machines are combined with hand tools in my furniture making, I advocate that woodworkers should embrace hand tools. It is necessary to form a connection between hand and wood medium prior to seeking efficiency and a production mindset. Hand tools often get a bad rap as being slow and tedious. Instead, what hand tools offer is control,  dexterity, quiet and a close connection to the wood medium. In a one person furniture making studio, hand tools offer a healthy balance to the use of machines. Projects include through dovetails, portable board jack build, moxon vise build, and knife hinge install.

The second or  furniture maker section provides a glimpse into furniture making as a career. Woodworkers often aspire to become furniture makers or go into business for themselves. As a furniture maker for several decades, I share knowledge and insight acquired over the years. Some articles will inspire you to take the leap and become a full time furniture maker. Topics in the section include setting up shop, the furniture maker journey, the furniture maker lifestyle, social media for a furniture maker, and insight into diverging from furniture making to other forms of woodworking.

The third section is devoted to furniture design. Furniture design forms a large part of woodworking. Often, it is necessary to design a complete piece of furniture or modify an existing design. The design process has evolved over past decades with the advent of computer software (CAD). Pencil and paper are now combined with CAD. Articles include how to create and refine a design, the concept of form and function and how it applies to furniture.

The fourth or advanced woodworking section delves into techniques to further your woodworking and furniture making. Veneering techniques, both manual and vacuum veneering are described. The process of creating a jewelry box is discussed in one article. The Japanese art of Kumiko is described in a final article.

235 Pages, 8.5 X 11 in. Non-fiction.  
Digital:  WOODWORKING: FROM DESIGN TO MAKING 
Print Edition:  WOODWORKING: FROM DESIGN TO MAKING 

 

The evolution...

Several years ago, 2006 to be exact, Michael Dresdner contacted me to ask about profiling me in an upcoming Woodworker's Journal online publication. Of course, I jumped at the opportunity to talk about my woodworking and how I got to where I was at the time. I was transitioning from primarily being a box maker to furniture making and the reasons for this shift in direction were discussed in the interview.

In that period, I had completed a series of courses at a high-end furniture making school and began to use hand tools more in my work. I recall that the year 2006 was an important juncture in my woodworking. I had embraced the Krenov philosophy and his methods of work. Reading and attending the fine furniture making school inspired me to increase the complexity and scale of my woodworking. I also learned to slow down my woodworking and focus instead on each and every piece rather than applying myself to creating in batch mode ( multiples). So my direction changed dramatically in the years 2006-2008 to where I now design + build one-off furniture pieces exclusively.

The most important takeaway from the interview would likely be the last line: “If you are tired of your day job,” Pirollo advises, “do what I did. Pursue your passion instead.” To this day, I completely believe in this quote. It is never to early to pursue your passion. Get a head start, so if unforeseen circumstances affect your livelihood (career), you will be prepared.  Early on my hi-tech career, I pursued many woodworking courses at the college level, set up my own workshops and struggled and worked at learning the woodworking trade. After experiencing a total of 3 downsizings, I gave up on my hi-tech career and moved on to a career in woodworking. This had been my Plan B all along 😉 The important part is that I was well prepared to launch a second career. You never know where fate will lead you!

I'll let you read the article.
Norman Pirollo: The Refined Edge of White Mountain

1860's Sawmill & Cabinetmaker shop

This past week while camping I toured an authentic 1860's pioneer village in the area. We camp in the same area each year and try to visit Upper Canada Village while there. With each visit I learn something new or pick out a detail I missed on previous visits. One favorite stop is the authentic sawmill which continues to produce boards to this day. Most of the wood is used within the village. Watching the water-powered bandsaw in operation continues to amaze me. The innovative features built-in to process logs into boards are nothing short of ingenious. There is also a system to use trucks on wheels to transport logs in , then roll them onto the bandsaw platform for ripping. The videos below shows the bandsaw in operation and water turbine at the lower level. Blade is stationary except for up and down movement. The log is advanced into the blade through a system of geared steel wheels and detents. The bandsaw is powered by a shaft driven by a turbine wheel. The water is piped in to the sawmill through a system of square wood pipes which increase the velocity of water to spin the turbine. Water begins at one height when entering the sawmill and exits at a lower level. This is what causes the water to increase in velocity. The bandsaw mill works well with old growth white pine brought in from another area.

Video here:  Water-Turbine

Video here:  Water-powered 1860 bandsaw

Another favorite stop is the authentic cabinetmaker shop where furniture is continually churned out, albeit at a much slower pace we are familiar with. Most of the furniture produced in the shop is used in the authentic pioneers village. All furniture is created with hand tools as relatively no woodworking machines existed in this era. The Industrial Age was just beginning. Watching the cabinetmaker (David Jones) and apprentice provided a real appreciation for a slower, manual form of woodworking.

So I had the opportunity to do a short film of David Jones (resident master cabinetmaker) and apprentice. I asked a few questions while filming. They are currently working on a side table with frame and panel doors and drawers. All joinery is either pinned mortise and tenon or dovetails.
I have probably visited this Cabinetmakers shop four times to date and continue to enjoy discussing with the resident cabinetmakers their work methods and current projects.

Video here:  1860 Cabinetmaker Shop

I then visited the blacksmith shop which also doubles as the ferrier shop for the horses in the village. Had a good talk with the blacksmith. At the time he was forging a keyway for a geared wheel in a piece of machinery used in the crop fields of the village.

New product, handcrafted bench dogs...

I have been successfully using these hardwood bench dogs in my furniture design+build studio for over 8 years. Why not make them available as a product. For most woodworkers, time is both limited and valuable. I have the setup and expertise to make these. The result is more free time for woodworkers to do what they love.

Hardwood bench dogs are better suited to working with wood than metal ones. This solid hardwood bench dog has a 3/4 inch diameter round profile. The round bench dog is intended for use in workbenches with 3/4 inch round holes. A spring-loaded bullet catch is press fit into the sliding part of the bench dog. This ensures that the bench dog makes a solid fit with the workbench hole.

The length of the bench dog is 3.75 inches which is ideally suited to most workbench thicknesses. To ensure positive clamping of thinner stock, a raked flat notch is recessed on one side of the bench dog. Leather is applied to the face of the raked flat face of the notch to prevent wear on furniture components clamped against the bench dog. The bench dog can easily be lowered into the dog hole when not in use, and raised for use.



The bench dog can be raised to match the thickness of the stock that is being hand-planed, assuming there is a 3/4 inch through-hole in the workbench surface. The hardwood bench dog eliminates the risk of marring the metal sole or blade of a metal-bodied handplane. The hardwood used in the bench dog design is oak.

The price for each handcrafted bench dog is currently $11.50 and available through WoodSkills

New course! "Start Your Own Woodworking Business"

Over the winter and with time on my hands, I devoted another few weeks to developing a new course on Starting a Woodworking Business.I had a health scare, was sidelined for a while and this prompted me to hunker down and put into words my experience with starting woodworking businesses.The course is loosely based on my book with the same title. In today's economy it is becoming more important to become self-sufficient, secure jobs are a thing of the past. I should know having been downsized 3 times. Woodworking is a growing field and we need more woodworkers to go into business and market their unique designs. It is the business side of woodworking that drove me to come up with new and higher quality work. In this course, I guide you through the process of starting and setting up your own woodworking business. I am sharing my 20 year expertise and knowledge in this course.I provide the necessary expertise and answers questions about starting your own woodworking business in this information packed course. 

Downloadable video lectures include all subjects pertaining to starting your own woodworking business. Each video lecture guides you through the learning process of starting a woodworking business. The Start Your Own Woodworking Business Course is derived from twenty years of woodworking and furniture making expertise in a business environment. 3 hours long. 23 lectures. Course can be downloaded or on DVD. Available through WoodSkills

New, updated woodworking course...

What I've been up to. So I decided to update the Woodworking Course I have been marketing. I hunkered down and added new graphics and images to the course. It is now much more interesting to watch and hopefully a great learning experience for someone wanting to learn woodworking. The comprehensive course content is similar to what it was, the lectures are all there although a couple of lengthier lectures ( bandsaw and veneering) have been broken up into 2 individual lectures each. In the process there is a new Course Overview that I will include here. This was a huge amount of work and I broke it up into manageable pieces over a period of weeks. I enjoyed the process and it re-acquainted me with some aspects of woodworking I had been neglecting! Available through: WoodSkills