Sunday, December 6, 2009

Hall table...

In my previous post I discussed how I like to use maquettes as part of the design process, how I can better visualize the design in three dimensions with the maquette. The maquette also allows me to determine if both the proportions and aesthetics of a piece are fine or need to be improved. While toying with the maquette for the hall table base, I came upon a different orientation for the base...simply inverting the maquette provided me a completely different outlook on the design. The base then evolved from a V-shape to an arched look. Orienting the maquette with the legs down eliminated the need for me to create a sub-base for the upper base, a sub-base which was to stabilize the V-shaped base above. This sub-base can be seen at the bottom of the maquette.This was not much of a design dilemma and if done correctly would have enhanced the V-shaped base above.

On the other hand I now needed to create a structure to firmly hold the table top itself, since the base is arched and the pointed top has minimal latitude with which to securely fasten a table top. The new design of the base now opened up a possibility for me, to create a "wishbone" styled arch. The arched base could be simply an arch but why not create an image of something else while maintaining the arch structure and shape? I looked at a few wishbone details and re-designed the arch to better reflect the shape of a wishbone. In this process I also developed the semi-circular table top support for the table top which melds with the curves in the wishbone and would soon be part of a curved table top. This semi-circular support actually evolved from the original maquette orientation as you can see in the photo above. I also needed to consider the harmony of the table, do all the elements blend together well? I wanted the semi-circular table top support to blend in with the table top so I created it with the same wood species, in this case bloodwood. Bloodwood also nicely contrasts with the maple base.

The cocobolo feet on each of the legs are a small touch I included to bring some of the colour down to the bottom of the "wishbone" shaped base and to create balance.The hall table also needed to have a narrow profile so I placed this criteria in my design. I made it narrow but at the same time stable. When I designed this hall table I use predefined measurements for typical hall table designs. I incorporated a curved top into the design with its widest part at the peak of the "wishbone" arch. I hope I have enlightened a few of you of the positive aspects in using a maquette as part of the design process.