Sunday, March 28, 2010

Wall cabinets...

In the past two days I have been working on two wall cabinets for my studio. The cabinets are intended for small tools , marking gauges, small hardware and odds and ends. There is never enough cabinet space for all this, as I'm sure many of you can attest to. My final design is based on a certain depth, width and height of the cabinets. There are existing wall mounted cabinets in the studio and as part of the criteria I wanted these to be of the same approximate width and height size only deeper. This was arrived at by using the maximum depth allowable without the cabinet interfering with any activity I might be performing nearby. I also opted to have two doors on each of the cabinets instead of one wider door, this made much more sense and would eliminate any issues with wide, swinging doors interfering with anything close by.

I will build two of these cabinets since I would eventually need another and the extra effort in creating a second cabinet is far less when they are made at the same time. The cabinet itself is assembled with dimensionally stable baltic birch plywood. The joinery is rabbets in the corners reinforced with plugged screws. The shelves ( 2 per cabinet) are housed in dadoes within each of the side panels. I applied solid cherry edging to the functional edges of the baltic birch plywood primarily for aesthetic reasons since I intend to have the door frames of solid cherry. These cabinets were designed and created with a small budget in mind, and since they are somewhat utilitarian I did not want to spend needless amounts on top grade wood. In fact, I used some cherry seconds I had in my lumber pile.

The door panels are thinner baltic birch pieces. I cut the best pieces from a larger piece of baltic birch ply for these panels, focusing on the lighter colour and appealing graphics to complement the cherry frame. The panels are inset into grooves in both the rails and stiles. The door frames are assembled using dowels. I took extra time to select better grain orientations for the long stiles to eliminate any twist possibly causing the doors to warp. I also installed solid edging on the shelf fronts to create a uniform cherry appearance once the cabinet doors are opened.I decided to use piano hinges to attach the doors to the cabinet since I already had a few of the piano hinges and I wanted both cabinets to be identical. More on the cabinets and I will have a photo of one of the cabinets mounted on a studio wall once the second cabinet is completed.

3 comments:

Tico Vogt said...

Hi Norman,

I like wall cabinets. I'm sure your life in the workshop will be enhanced when your new cabinets are up and all those tools are easily reached behind nice looking doors.

Enjoy!

Best,

Tico

Candie Rossler said...

Question about design:

If you're that type of person who wants all things in a room to blend together, do you think that it's good to match the design of the cabinets with the design of the doors?

Hope you can answer soon!

Candie

wall cabinets said...

I like wall cabinets in the blog... They help you store a lot of waste and unnecessary stuff, which would other wise scatter the other arrangements and home.
wall cabinets